USER MANUAL AND CARE INSTRUCTIONS FOR OILED DĄBEX FLOORS
Rubio Monocoat Soap and Rubio Monocoat Surface Care
• It is not recommended to wash the surfaces with water and soap daily. We recommend washing with water and RMC Soap no more than once every two weeks.
• For furniture, we recommend using the ready-made product RMC Surface Care.
• Wash the surface with a water solution of RMC Soap using a maximum of 50 ml of product per 10 liters of water.
• Using too much soap will create a dirt-attracting film. It is better to use less soap or refrain from using it altogether.
• RMC Soap does not protect or enhance the action of the oil used to cover the surface.
• For surface cleaning, it is best to use a mop and two buckets, with the first containing warm water with RMC Soap and the second containing clean cold water for rinsing the dirty mop.
• Machine cleaning with water is not recommended, as this method leads to excessive water accumulation on the surface.
RMC Universal Maintenance Oil Maintenance – universal maintenance oil in 3 colors.
Rubio Monocoat Universal Maintenance Oil is a universal oil designed for the maintenance of previously oiled wooden surfaces regardless of the original product used. The product protects and refreshes the color. RMC Universal Maintenance Oil cares for the surface, giving it a more beautiful appearance (slightly satin sheen) and increasing its resistance to liquids.
1. Clean the floor from dust and dirt.
2. Thoroughly wash the surface with RMC Soap and water, then rinse carefully with clean water to remove soap residue. Allow to dry completely.
3. Manual application - Apply the oil using a cloth, brush, or sponge.
4. Mechanical application - Apply the oil using a polishing machine with a beige pad. Work on a surface of 2 to 4 m2 at a time. Wipe dry within 15 minutes using a paper towel or cotton cloth. If using a polishing machine to wipe the surface, use a white pad.
5. Ensure good room ventilation. The floor should be dry within 6-8 hours.
RENOVATION
Rubio Monocoat Oil Plus 2C In case of significant wear or color loss, apply RMC Oil 2C wax oil in the original shade.
Application:
1. Sand the surface with 100-grit sandpaper or GS-320 pad.
2. Thoroughly clean the surface with a vacuum cleaner. We recommend using RMC Cleaner (for interiors).
3. Apply RMC Oil Plus 2C (in the original color) using a white pad.
4. The oil efficiency depends on the degree of wear of the surface to be renewed but is very high. 350 ml of oil is sufficient to cover approximately 50m2.
5. Do not apply the oil at once on too large a surface, as the absorption time should not exceed 10 - 15 minutes.
6. Remove excess oil using a white pad and/or a lint-free cloth. Wipe the oiled surface dry.
7. A properly wiped oil surface, with good room ventilation, will be dry within 8-12 hours.
8. The surface can be wiped with a damp cloth after 48 hours. After a week, it can be washed with water and RMC Soap.
RMC Refresh Eco is a ready-to-use product that refreshes and renews oiled wood. Depending on the degree of surface wear, in some areas, RMC Refresh Eco can be applied several times a year. This procedure may be necessary when the surface begins to show initial signs of wear.
It can be used several times a year. Non-pigmented. To restore color, use RMC Oil Plus 2C in the color in which the surface was treated.
- APPLICATION:
1. Clean the surface with RMC Soap or RMC Surface Care. Allow to dry.
2. Spray a small amount of RMC Refresh Eco on the area to be refreshed.
3. Spread the product along the wood fibers using a microfiber cloth.
4. Allow to dry for at least 1 hour. Once dry, the surface is ready for use.
- COVERAGE: 1 L = +/- 100 m2
The stated coverage is indicative and depends on the type of wood and surface preparation. For precise calculations, it is recommended to conduct a test.
RMC Universal Maintenance Oil Pure is a maintenance product that refreshes wood treated with Rubio® Monocoat oil, as well as improves the appearance of surfaces oiled with other products.
What makes RMC Universal Maintenance Oil so special?
- Universal application
RMC Universal Maintenance Oil is designed for the maintenance of all oiled surfaces. This product can also be used on lacquered surfaces with micro-cracks.
- Extra protection
RMC Universal Maintenance Oil not only refreshes the surface but also increases its resistance to liquids. This makes it perfect for high-traffic areas that require additional protection, such as floors in public places, offices, restaurants, hotels, etc.
- Additional shine
Those who enjoy a more elegant decor will be pleased to know that Universal Maintenance Oil gives the surface a slightly satin sheen.
RMC Universal Maintenance Oil White is a maintenance product that refreshes wood treated with Rubio® Monocoat oil, as well as improves the appearance of surfaces oiled with other products.
What makes RMC Universal Maintenance Oil so exceptional?
- Universal application
RMC Universal Maintenance Oil is designed for maintenance of all oiled surfaces. This product can also be used on lacquered surfaces with micro-cracks.
- Additional protection
RMC Universal Maintenance Oil not only refreshes the surface but also increases its resistance to liquids. Therefore, it works perfectly on high-traffic surfaces that require additional protection, such as floors in public places, offices, restaurants, hotels, etc.
- Additional shine
For those who prefer a more elegant decor, it's worth noting that Universal Maintenance Oil gives the surface a slightly satin finish.
A strong, highly concentrated cleaning agent with a pleasant scent that does not damage the cleaned surfaces. Specifically designed for lacquered floors. It effectively removes grease and other dirt, leaving the floor looking fresh. Recommended for all cork, parquet, and multi-layer parquet floors. Also ideal for cleaning flexible floors and stone floors.
- Application: Pour 50-100ml of LOBA CLEANER into 10 liters of water and mop the floor.
- Consumption: Depending on the level of dirt. The product is highly efficient.
A water-based care product for all types of lacquered floors. The product stands out for its exceptional adhesion, especially in relation to problematic substrates such as floors coated with antiscratch lacquer formula.
- Additional benefits: protection against scratches, shine, easy to use.
- Substrate preparation: The substrate should be vacuumed. Clean and dry.
- Application: Apply LOBA ParkettCare undiluted evenly on a washed and dry floor. Do not attempt to improve the surface while the product is drying! Careful walking possible after approx. 1 hour.
- Consumption: 3-4l / 100m2 per layer.